MEXC Trading Fees: Spot, Futures And Zero-Fee Promotions Explained

MEXC trading fees look low on paper: according to MEXC's own pages, spot makers pay 0%, perpetual futures makers pay 0% and futures takers pay 0.02%. Those headline numbers hide several moving parts, including MX token discounts, limited zero-fee promotions and a funding cost that no fee table shows. In this article, Backcom.io walks through each fee type, the discounts, the promotion limits and a worked cost example, so you can estimate what you will actually pay before you trade.

MEXC Trading Fees At A Glance

MEXC charges a fee on most filled orders, and the rate depends on the product, whether you are a maker or a taker, and any promotion or MX discount that applies to your account. Five points cover most of what a new user needs:

• Maker orders are the cheap side: a resting limit order that adds liquidity is listed at 0% on both spot and futures.
• Takers pay on futures: a market order on a perpetual contract is listed at 0.02%.
• MX holders get a discount: holding enough MX or paying fees in MX lowers the taker rate.
• Zero-fee promotions are conditional: they cover selected pairs, have quotas and can end without much notice.
• Funding is a separate cost: it moves between traders, and it can be larger than the fee itself.

The figures below come from MEXC's own pages, read on 8 November 2026: the MEXC trading fees guide, the zero-fee announcement dated 21 April 2026 and the MX holder fee notice. MEXC's pages do not fully agree with each other, so the rate shown in your own account is the one that counts.

MEXC Maker Taker Fees: Spot And Futures Base Rates

MEXC maker taker fees follow the standard logic: a maker adds an order to the book and waits, and a taker removes liquidity with an order that fills at once. If the idea is new to you, our guide to maker vs taker fees explains it in more detail.

MEXC's April 2026 announcement describes these rates for a standard account:

Reference rates as at 8 November 2026, taken from MEXC's published pages. They can change, and exclusions apply, so check your own fee rate in your account before you trade.

Note the conflict. An earlier MEXC guide from November 2025 lists spot takers at 0.05%, while the April 2026 announcement lists 0%. The reasonable reading is that rates have moved over time and differ by account, so treat the table as a starting point, not a promise.

Two details help you plan. Liquidations are excluded from the zero-fee promotions, so a forced close can cost more than a planned exit. Institutional accounts, market makers and API users are also excluded from the zero-fee structure, so the headline rate may not apply to automated trading.

MEXC Futures Fees: How The Cost Is Calculated

MEXC futures fees are charged on the full contract value of your fill, not on the margin you put up. The fee equals the rate multiplied by the position value, and it is paid when the order fills. A trader who opens a $10,000 position with $1,000 of margin pays the fee on $10,000, which is ten times the amount a margin-based estimate would suggest.

Because a trade has an entry and an exit, a round trip normally means two fills. A short worked example, for illustration only, uses the listed 0.02% taker rate on a $10,000 perpetual position:

• Taker both ways: 0.02% × $10,000 = $2 to open, plus $2 to close, so $4 in total.
• Maker both ways: 0% × $10,000 = $0 to open and $0 to close, so $0 in total.
• Mixed (maker in, taker out): $0 + $2 = $2.

The gap is small per trade. It adds up for anyone who trades often, and a limit order is the first lever to check. Our guide to cross margin vs isolated margin shows how margin mode changes the rest of the risk, and the liquidation price guide covers the downside.

MEXC Funding: The Cost Outside The Fee Table

Funding is a periodic payment between long and short traders on perpetual contracts, and it is separate from trading fees. When the rate is positive, longs pay shorts; when it is negative, shorts pay longs. The payment normally goes between traders rather than to the exchange, and you pay or receive funding only if you hold the position at the settlement time.

The calculation is the position value multiplied by the funding rate. Assume a $50,000 long position and a funding rate of 0.01% per settlement (an assumption, not a forecast): each payment is $5. If settlement happens three times a day, a week at the same rate costs about $105. The entry fee on that position at the 0.02% taker rate is $10, so funding matches the entry fee after two settlements and exceeds it from the third. Check the funding interval on the contract page, and read our guide on how funding rates work for the formula.

MEXC Fee Tiers: MX Discounts And VIP Levels

MEXC fee tiers are less layered than a classic VIP ladder: the main discounts come from holding or spending MX, MEXC's exchange token. Two discounts are described on MEXC's pages, and they do not stack. The larger one applies first.

Reference terms as at 8 November 2026. The required MX balance differs between MEXC pages: 1,000 MX in the August 2024 notice and 500 MX in the November 2025 guide and the April 2026 announcement. Confirm the current threshold in your account.

The holding discount uses daily snapshots of your balance, and sub-accounts qualify under the same rule on their own. The discount of the main account is not shared with them. MEXC's pages also mention extra reductions for accounts with about $5 million of 30-day volume, but they do not publish a full tier table.

The practical reading: a retail trader on futures can cut the taker fee in half by holding MX, but the saving on a $10,000 round trip is only $2. Buying a volatile token to save a few dollars is rarely sensible. The token price can move more than the fee discount saves, so treat the discount as a minor bonus, not a strategy. For a comparison with another exchange's structure, see our breakdown of Gate trading fees.

MEXC Zero-Fee Promotions: What Is Free And What Is Not

MEXC zero-fee promotions set both maker and taker fees to 0% on eligible pairs, but only while the pair stays eligible. MEXC's zero-fee page states the main conditions:

• Eligibility is reviewed: pairs are selected after periodic reviews of account status, trading activity, effective volume and market conditions.
• Some pairs have quotas: once the volume quota is used, trades on that pair return to the standard rate.
• Liquidations are excluded: zero fees do not apply when the exchange closes your position.
• Some accounts are excluded: institutional accounts, market makers, project teams and API users are not eligible.
• No fixed end dates: MEXC refers users to the latest announcements for each pair.

The page is also inconsistent. One answer says all spot pairs already carry 0% maker and taker fees, while another says the zero-fee offer covers selected pairs across futures, spot and fiat. Read this as a warning: a zero fee on one pair today may not hold on another pair, or next month.

A zero fee also does not mean zero cost. The spread and slippage on a thin pair can exceed any fee you save, and a market order on an illiquid token can cost far more than 0.05% in price impact.

MEXC Withdrawal Fees And Other Costs

MEXC withdrawal fees are charged per asset and per network when you move coins off the exchange, and they are separate from trading fees. The fee depends on the coin and the chain you choose, and it moves with network congestion. MEXC's guide describes USDT withdrawals as costing a few cents to a few dollars, without a fixed table, so read the exact amount on the withdrawal screen before you confirm.

Three habits keep these costs down. Choose the cheapest network the receiving platform supports, and test with a small amount first. Do not withdraw in many small transfers, because the flat fee repeats each time. Compare the withdrawal fee with the trading fee you saved, since a zero-fee pair does not help if you pay a fixed fee to leave. For a view of the exchange itself rather than its costs, our MEXC legitimacy review covers regulation, security and withdrawal checks.

What $100,000 Of Volume Costs On MEXC

The clearest way to compare MEXC trading fees is to apply the listed rates to one volume figure. This example uses $100,000 of monthly volume.

The figures are an assumption, as at 8 November 2026, using published rates. They are not a forecast. Your account, pair, promotion status and order mix will change the result.

If MEXC applied the 0.05% spot taker rate from its older guide instead, the spot taker line would be $50. The table also leaves out funding, spread and withdrawal fees, so the cheapest rate on paper is not always the cheapest trade.

MEXC Rebates Through The Partner Program

MEXC Rebates are a share of the trading fees you pay, returned to you when your account is linked to the partner program. The program page shows up to 50% of fees back: 20% credited by MEXC daily and a further 30% paid every Monday (page checked 8 November 2026).

Apply this to the example above. $100,000 of taker-only futures volume produces $20 in fees, so the full 50% would return up to $10. On a pair with a 0% fee there is nothing to share, so a spot maker order earns no rebate. A rebate is a share of a fee, not of your trade or profit, and it applies to winning and losing trades alike. It lowers your cost; it does not change the risk of the position.

Two conditions apply. A new account should be registered through the program link before the first trade, because most exchanges cannot attach a rebate afterwards. Each UID, including sub-accounts, is linked separately in the Backcom App. You can read the current terms and linking steps on the MEXC rebate page.

Backcom.io is an independent introducing broker (IB/affiliate) of the exchanges it lists, including MEXC; the second portion is funded from the commission the exchange pays Backcom.io. See the risk disclaimer for details. A rebate is not a reason to open an account, deposit funds or trade more than you planned.

How To Pay Less On MEXC Without Taking More Risk

Lower fees come from how you trade, not from chasing discounts. Five habits make the biggest difference:

1. Use limit orders when you are not in a hurry, so you pay the maker rate.
2. Check the pair's current rate before relying on a zero-fee promotion, since quotas and reviews can change it.
3. Check funding before you hold a perpetual overnight, and compare it with the fee you would save.
4. Do not buy MX only for the discount, because the token price can move more than the saving.
5. Read your own rate in your account after any change in tier, pair or account type.

Frequently Asked Questions (FAQ) About MEXC Fees

Conclusion: What Do MEXC Trading Fees Really Cost?

On MEXC, the fee table is only part of the cost: order type, promotion status, funding and slippage together decide what a trade costs you. Maker orders are listed at 0%, futures takers at 0.02%, and MX discounts trim that further. Use limit orders where you can, confirm that a pair still qualifies for zero fees, watch funding on long holds and read your live rate before you size a position. Treat any rebate as a small cost reduction, never as a reason to trade more.

Disclaimer: This content is compiled by Backcom.io for information only and is not investment advice. Crypto assets are volatile and leveraged products can lose your whole margin. Fees, discounts, promotions and rebate terms can change, and rules differ by country of residence. Check the current terms and your local regulations before you register or trade.